Recommended Dimmers * † - LR6/LR6C
When coupled with a recommended dimmer, the LR6 family of fixtures will provide maximum rated output when the dimmer is set full open andwill typically turn off when dimmed below 25% of maximum rate output.
Wattstopper Product Part Number Min Load* Miro DCD267-A 25W Miro DCD267-B 25W Miro DCD267-I 25W Miro DCD267-W 25W Miro MCD267-A 25W Miro MCD267-G 25W Miro MCD267W 25W				Cooper Product Part Number Min Load* Aspire 9530WS 60W Aspire 9530DS 60W Aspire 9530SG 60W

 

Leviton Product Part Number Min Load* Illumitech IPI06-1LX — Illumitech IPI06-1LZ — Illumitech IPI06-LAW — Illumitech IPI06-LEI — Illumitech RPI06-10X — Illumitech RPI06-LEI —

Product Part Number Min Load* Trimitron 6602-I — Trimitron 6602-W — Trimitron 6681-A — Trimitron 6681-IW — Trimitron 6682 — Trimitron 6683-A —

Product Part Number Min Load* Trimitron 6683-W — Trimitron 6684 — Trimitron 6684-IW — Trimitron 700-I — Trimitron 705-I — Trimitron 705-w —

Copyright 2008 LED Lighting Fixtures, Inc.		Rev 1/16/08
*Compatibility was determined based on the operation of the LR6 with a partiular dimmer or type of dimmer for a given manufacturer. In some cases additional load was used with the LR6 to meet manufacturers minimum load requirement for a dimmer. The presence of a dimmer on the compatibility chart is not a guaranty of the compatibility of the LR^ in any particular installation. The absence of a dimmer from the compatibility chart does not indicate that the LR6 is not compatible with a particular dimmer.
†Please refer to the dimmer manufacturer's installation instructions for proper installation and minimum load requirements. Maintaining manufacturer's minimum load requiremets is critical to the proper performance of a dimmer.
Return to LR6 page		What's New page